Problems and solutions of toilet paper rewinder

　　The paper sticks rolled out have different weight in each roll. The number of windings is fixed on the computer. But the weight is always increasing.

　　Treatment: first, the weight of rewinder paper is different because of three reasons: one is that the width of each rotation is different, the second is that the quantitative banner of original paper has changed; thirdly, you do not stretch the roller, forming a part of wrinkles, so the weight becomes larger.

　　2. It's just now. It's always a waste of paper. How to use it reasonably? Treatment method: how to apply paper to reduce waste. This is what you usually pay attention to; first of all, you should pay attention to the work you have to buy, and the width of the large paper roll you buy should be appropriate, so the two sides are cut less. Secondly, when rewinding, try not to break the paper, do not appear unqualified products, so that can reduce waste.

　　3: The paper cutter should remove the roll paper always skew, how to adjust the horizontal point. Processing method: the paper cut out by the paper cutter is always skewed. This is to parallel your large paper roll with the rewinder drum, otherwise the paper will be skewed. Also, it is your stretch roller arc to be adjusted, otherwise there will be deviation phenomenon.

　　The right side of the rewinder roll is always in the broken part of the heart, and the result is always uncoiled. Cannot scroll. Treatment: if the right side of the broken side is always broken, then check whether the paper tension on this side is larger than that on the left, and it is not that the drawing roller or the large roll paper is inclined more, which causes the edge to be too tight and broken.

　　Treatment method: toilet paper has good ink absorption. Due to the high air humidity ratio in rainy days, it may have a large number of outer and inner layers drying, which results in paper deformation and strength change, and forms a time-consuming and quantitative bias. To eliminate this problem, we must consider the ventilation situation of the workshop and try to carry out boring for the workshop as much as possible.

　　two hundred and one thousand nine hundred and seven trillion and fifty billion nine hundred and seven million two hundred and forty-four thousand seven hundred and three

　　What you can't ignore about rewinder:

　　Rewinder is a special equipment for papermaking. The purpose of the toilet paper rewinder is to rewind the paper roll (called the original paper roll) produced by the paper machine in sequence. After the paper is rewound, it is made into finished paper. At present, the paper machine industry has become a development trend to replace DC drive with AC drive.

　　The rewinding process mainly completes three tasks: first, cutting the raw paper edge; secondly, cutting the whole original paper into several width that meet the user specifications; third, controlling the winding diameter of the finished paper roll to make it conform to the factory specifications.

　　The transmission device of toilet paper rewinder, such as gear chain, needs to be added with butter for a long time; generally, there will be no problem with the rewinder. The consumable parts are no more than some small gears. If one is added, the printing knife is easy to break, and the wool roller will become fine after one and a half years of use, and it needs to be transported back to the factory for renovation. If the embossing pattern needs to be replaced in the steel roll embossing device, the steel roller shall be transported back to the factory for repair The original factory has been modified; pay attention to the voltage of rewinder to be stable, otherwise it will easily burn the motor; pay attention to hygiene and do not let sundries fall between the steel roller and the wool roller.

　　two

　　The characteristics of the full active toilet paper rewinder

　　The paper feeding rack of the material paper is provided with the active paper feeding equipment and paper feeding equipment on the paper feeding frame (three axis Paper), then the paper is introduced to the paper feeding roller, and a bar device is arranged in front of the paper feeding roller to flatten the paper surface, and then the drilling equipment finally enters the winding guiding equipment.

　　The rewinder paper is finished by repeated winding with the guide roll and the paper roller (the tightness of the paper is adjusted according to the customer's requirements and adjusted at will by air pressure control) the paper winding machine will park the paper to actively push out. The paper is separated by the paper cutter, and the active glue spray seal is applied together with the paper cutting. The whole program is finished. After the start-up delay to the time, the machine will be restarted. After the products are finished, the paper will be cut into different standard roll paper by the big saw (the customer requires to cut the paper separately). The whole process is controlled and completed by computer programming PLC and frequency conversion.

　　1. The full-active toilet paper rewinder can be double-sided embossing, glue compound, and can make the paper softer than single side embossing, and the product has the same double-sided effect. When used, each layer of paper does not disperse, especially suitable for processing the kitchen paper of roll loading, and the weight of the same large and fine products is reduced by 15% or more.

　　2. The machine is equipped with centerless, solid, roll tube toilet paper, which can be switched between products in a flash, and can be selected according to the needs of users.

　　3. The active trimming, glue spraying, sealing and shaft pulling are finished synchronously in a moment, so that the paper roll is turned into band saw and cut and packed without paper loss. Therefore, the production power and product level are greatly improved. The products are left with paper tail, which is convenient to be used.

　　4. Pneumatic belt paper feeding, rewinding and each axis of the original paper have independent force conditioning mechanism.

　　four

　　What mistakes should be paid attention to in purchasing health rewinder

　　Toilet paper processing has become the first choice for entrepreneurship. Due to the rapid development of paper processing machinery, users often fall into various misunderstandings when choosing the toilet paper rewinder. This paper makes some in-depth analysis on some common mistakes in the current purchase and discusses how to choose a truly suitable toilet paper rewinder,

　　1、 Price error: some users think that the price is the core, the toilet paper rewinder is almost the same, but the fact is that the whole machine of the toilet paper rewinder is very different, only considering the price, it must be their own to suffer the loss! Remember the truth of one price and one price, and rational consumption is the truth. Individual manufacturers are tempted to take advantage of small and cheap customers by the temptation of low price!

　　2、 Misunderstanding: in the paper machinery industry competition is becoming more and more big now, advertising can be said to be overwhelming, believe that many consumers in Baidu, 360 search, classified information website and other saw a variety of advertising, they changed the way to tell you "our equipment is good", to encourage consumers to buy. At this time, we should polish our eyes to see which propaganda is credible, which are to be confirmed, and not be covered by the advertising of the day. Recommended reading: how to judge the quality of a paper machinery company

　　3、 Wrong maintenance: no good product can guarantee that there are no problems in a few years. No matter what brand, we must consider how to promise the maintenance of the toilet paper rewinder, so after-sales service is very important. When you buy, do not be confused by the manufacturer's rhetoric. It is recommended to choose a manufacturer with good reputation for after-sales service when buying toilet paper rewinder!

　　4、 Misconception: some people think that the equipment done by a large factory is reliable and stable, and the equipment made by small factories is not guaranteed. In fact, the quality of the equipment has a great relationship with the equipment itself. The key is the reputation of the manufacturer. The machine is stable, the problems are few, and the after-sales service is good, and the factory is big enough to get a customer to visit. It is all in vain. The factory is no longer big enough to get a customer to visit. It is all in vain No matter how small, there are enough customers to let us consult, and it is worth our attention!

　　five

　　Performance and characteristics of rewinder equipment:

　　1. equipment working principle: unwinding, conveying, cutting, counting, winding, and the end face neat and flat

　　2. the equipment adopts frequency conversion control system, which is simple to operate and stable in performance.

　　3. the equipment is equipped with automatic counting and shutdown function.

　　4. the imported round knife is cut by cutting, and it is convenient to adjust the tool. The end face of the winding is neat.

　　five

　　How to do daily maintenance for rewinder

　　The rewinder is generally used for: mica tape, paper and film rewinding and cutting, which plays a two role. It is often used to split the wide coil and further re cutting plays an important role, and it is a special equipment for paper, mica tape and film. So, how should rewinder do a good job of daily maintenance?

　　1. the transmission device of toilet paper rewinder, such as gear chain, needs to be buttered for a long time.

　　2. the rewinder will not have problems generally. The consumable parts are no more than small gears. If one is the printing knife is added, the wool roller will become thin after half a year. It needs to be transported back to the factory for renovation. If the embossing pattern needs to be replaced in the steel roller embossing device, it is OK to transport the steel roller back to the original factory for modification, which will cost less.

　　3. pay attention to the voltage of rewinder to be stable, otherwise it will easily burn the motor; pay attention to hygiene and do not let sundries fall between the steel roller and the wool roller.